KettenMax Premium chain cleaning kit
The complete solution including cleaner and lubricant from S100 for all biker who believe in chain drive. The development does not stop. All realizations of the past 10 years were converted into the new KettenMax Premium.
How to use it
1a. Preparation
Turn off the engine, and insert the gear in neutral position. Jack up the motorbike on the main or paddock stand.
1b. Select, set up, put on and lock
Measure the chain width with template, select the right brushes according to the template colour and put them into the KettenMax (bottom box).
2a. Select, set up, put on and lock
Assemble the upper and bottom box at an easy accessible point (according to motorbike type in front or behind the bed of tire) and lock with the rubber band. Then screw the drain bag onto the KettenMax (bottom box).
2b. Hanging in, fixation
Ideal: Hanging in at the front and at the rear, and stretch with the quick release fastener. Rotation is possible in both directions. Hanging in according to type of motorbike only in the front or at the rear. Rotation is only possible in one direction.
3. Cleaning
Attach the screw cap with nozzle to the bottle of cleaner, connect hose with nozzle and Y-distributor, connect hoses with Y-distributor and KettenMax. Always connect the hoses to the upper (chain ingoing side) and bottom nozzle connection at the KettenMax. With direction change of rotation: reverse the upper hose. Supply cleaner proportional, rotate the rear wheel slowly (2 x chain run per minute). A gentle overall cleaning of the chain is ensured.
4. 4. Lubricating
Before the lubricating, unscrew the bottle and close with the original cap. Disconnect the hoses from the KettenMax. Let the chain dry for about 3 to 5 minutes. Put the lubricating adapter on the upper nozzle connection on the KettenMax(chain outgoing side). Spray in the lubricant in steps. Rotate the rear wheel slowly (2 x chain runs per minute). The lubricant accurately coats the important inner side of the chain and is evenly distributed by brushes.
IMPORTANT!
Before the lubricating, unscrew the bottle and close with the original cap. Disconnect the hoses from the KettenMax. Let the chain dry for about 3 to 5 minutes. Put the lubricating adapter on the upper nozzle connection on the KettenMax (chain outgoing side). Spray in the lubricant in steps. Rotate the rear wheel slowly (2 x chain runs per minute). The lubricant accurately coats the important inner side of the chain and is evenly distributed by brushes.
What's in the box:
- 1 Top box
- 1 Bottom box with screw cap for drain bag
- 3 Spray brushes, double row
- 4 Cleaning brushes, lateral (body red)
- 4 Cleaning brushes, lateral (body green)
- 4 Cleaning brushes, lateral (body blue)
- 4 Cleaning brushes, lateral (body black)
- 2 Brush stripper
- 3 Threaded screw-in spouts
- 1 Lock rubber
- 1 Drain bag with closing cap
- 1 Lubrication adapter
- 1 Hook large
- 2 Hooks small
- 2 Hanging in cords with quick fastener
- 1 Connection hose long
- 2 Connection hoses short
- 1 Y-distributor
- 1 Chain template (red)
- 1 Chain template (green)
- 1 Chain template (blue)
- 1 Chain template (black)
- 1 Screw cap with hose connection spout
- 1 Chain cleaner 250 ml
- 1 Chain spray 75 ml
- 1 Manual instruction
- 1 Packing