Are you 18 years old or older?
Sorry, the content of this store can't be seen by a younger audience. Come back when you're older.
The complete solution including cleaner and lubricant from S100 for all biker who believe in chain drive. The development does not stop. All realizations of the past 10 years were converted into the new KettenMax Premium.
1a. Preparation
Turn off the engine, and insert the gear in neutral position. Jack up the motorbike on the main or paddock stand.
1b. Select, set up, put on and lock
Measure the chain width with template, select the right brushes according to the template colour and put them into the KettenMax (bottom box).
2a. Select, set up, put on and lock
Assemble the upper and bottom box at an easy accessible point (according to motorbike type in front or behind the bed of tire) and lock with the rubber band. Then screw the drain bag onto the KettenMax (bottom box).
2b. Hanging in, fixation
Ideal: Hanging in at the front and at the rear, and stretch with the quick release fastener. Rotation is possible in both directions. Hanging in according to type of motorbike only in the front or at the rear. Rotation is only possible in one direction.
3. Cleaning
Attach the screw cap with nozzle to the bottle of cleaner, connect hose with nozzle and Y-distributor, connect hoses with Y-distributor and KettenMax. Always connect the hoses to the upper (chain ingoing side) and bottom nozzle connection at the KettenMax. With direction change of rotation: reverse the upper hose. Supply cleaner proportional, rotate the rear wheel slowly (2 x chain run per minute). A gentle overall cleaning of the chain is ensured.
4. 4. Lubricating
Before the lubricating, unscrew the bottle and close with the original cap. Disconnect the hoses from the KettenMax. Let the chain dry for about 3 to 5 minutes. Put the lubricating adapter on the upper nozzle connection on the KettenMax(chain outgoing side). Spray in the lubricant in steps. Rotate the rear wheel slowly (2 x chain runs per minute). The lubricant accurately coats the important inner side of the chain and is evenly distributed by brushes.
IMPORTANT!
Before the lubricating, unscrew the bottle and close with the original cap. Disconnect the hoses from the KettenMax. Let the chain dry for about 3 to 5 minutes. Put the lubricating adapter on the upper nozzle connection on the KettenMax (chain outgoing side). Spray in the lubricant in steps. Rotate the rear wheel slowly (2 x chain runs per minute). The lubricant accurately coats the important inner side of the chain and is evenly distributed by brushes.
Un produs care își merita banii, întreții cu mult mai puțin deranj decât dacă nu ai folosi acest dispozitiv.
In maxim 5 minute, după poziționarea dispozitivului pe lanț, treaba este gata (curățat și gresat). Este la fel de ușor de folosit ca in clipurile de pe YouTube).